Faults
Fault or fault combination
#Fault code
C22BD
hydraulic fault: inlet valve front right
|
C23BD
Hydraulic fault: A7/3y12 inlet valve rear right
|
C25D4
hydraulic fault: the pressure supply is missing or insufficient
|
C26F5
control unit internal fault
|
C26FB
implausible increase in pressure
|
C223D
hydraulic fault - inlet valve front left
|
C233D
Hydraulic fault : Inlet control valve rear left
|
C235A
Check component A7/3 (hydraulic unit SBC)
|
C235C
check component A7/3 (hydraulic unit SBC)
|
C235E
Check component A7/3 (hydraulic unit SBC)
-
we only offer exchange after prior inquiry!
|
C249F
Check operating time of component A7/3 (SBC hydraulic unit)
|
C2131
pressure reservoir faulty
|
C2359
Check component A7/3 (hydraulic unit SBC)
-
we only offer exchange after prior inquiry!
|
C2498
operating time of component A7/3 is exceeded threshold reached (SBC hydraulic unit)
|
Other faults on request |
Important repair hints (!)
We offer an overhaul of the hydraulic pump motor with subsequent resetting and hydraulic high-pressure test!
Important:
When removing the SBC unit, please always DEACTIVATE it properly using the diagnostic tester.
Please always send the control unit without the mounting bracket to avoid damage to the unit and the packaging! Special packaging requirements for the SBC can be found HERE