Faults
Fault or fault combination
#Fault code
|
P042F
EGR stays in the closed position
and
P0490
Flue gas recirculation – fallen below minimal value
and
Fault codes P0490 and P1162 appear together and it is not possible to delete them
|
|
P1259-62
Signal error between module electronic immobiliser and powertrain control unit
|
|
P1260
Communication between engine ECU and immobiliser faulty.
or
P1260
Theft detected, car blocks the status 64. The signal has not changed.
|
|
P1602
Immobiliser Communication Error
|
|
P1603
Motor ecu - EEPROM error
|
|
P1621
Immobiliser Communication Error
and
No activation from the immobiliser, no output code memorised in PCM (00 00 00 displayed in the learning modus)
|
|
P1621-64
Immobilizer Code Words Do Not Match
|
|
Engine temporarily doesn't start – when the error occurs, there is no communication possible with the ecu and the motor-/pre-ignite control light is not lighted up
|
| Other faults on request |
Important repair hints (!)
If you have different failures and fault codes than the faults listed on our products site, please get in touch with us before sending the unit over.
This device requires the following parts for check and repair:
