Faults
Fault or fault combination
#Fault code
P1602 Immobiliser Communication Error
|
P1259-62 Signal error between module electronic immobiliser and powertrain control unit
|
P1260 Communication between engine ECU and immobiliser faulty.
or
P1260 Theft detected, car blocks the status 64. The signal has not changed.
|
P042F EGR stays in the closed position
and
P0490 Flue gas recirculation – fallen below minimal value
and
Fault codes P0490 and P1162 appear together and it is not possible to delete them
|
No activation from the immobiliser, no output code memorised in PCM (00 00 00 displayed in the learning modus)
and
P1621 Immobiliser Communication Error
|
P1621-64 Immobilizer Code Words Do Not Match
|
P1603 Motor ecu - EEPROM error
|
Other fault on request |
Important repair hints (!)
If you have different failures and fault codes than the faults listed on our products site, please get in touch with us before sending the unit over.
This device requires the following parts for check and repair: