Faults
Fault or fault combination
#Fault code
Engine temporarily doesn't start – when the error occurs, there is no communication possible with the ecu and the motor-/pre-ignite control light is not lighted up
|
P1621 Immobiliser Communication Error
|
P1621-64 Immobilizer Code Words Do Not Match
|
P1602 Immobiliser Communication Error
|
P1259-62 Signal error between module electronic immobiliser and powertrain control unit
|
P1603 Motor ecu - EEPROM error
and
No activation from the immobiliser, no output code memorised in PCM (00 00 00 displayed in the learning modus)
|
Other fault on request |
Important repair hints (!)
If you have different failures and fault codes than the faults listed on our products site, please get in touch with us before sending the unit over.
This device requires the following parts for check and repair: