Faults
Fault or fault combination
#Fault code
|
Engine stops while driving and doesn't start again
|
|
Errors relevant to the pump control unit stored in the error memory P1564 P1664
|
| Other faults on request |
Important repair hints (!)
Dismantling instructions: please only remove the ecu.
Cut the cables of the solenoid valves so that assembly is possible with suitable connectors to be soldered or pushed in.
Carefully lift the control unit, unscrew the angle of rotation sensor located underneath the injection pump and carefully attach it to the pump.
Caution: When removing the solenoid valve from the flow control unit, it usually breaks, which is not available separately.
